2611052 Replacing flexible disc for rear propeller shaft: Notes
WARNING: This page is about a different car, the 2006 BMW 330xi and 2006 BMW 325xi. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove PROPELLER SHAFT from rear axle final drive and center mount
NOTE:
To protect universal joints, tie back propeller shaft in area of center mount.
Release screws and remove flexible disc (1) from propeller shaft.
IMPORTANT:
Replace shiny ZNS bolts and self-locking nuts.
Tightening torque and angle of rotation: 26 11 1AZ .