65 12 071 Removing and installing/replacing amplifier: Notes

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with NOTES on protection against electrostatic damage (ESD protection).

IMPORTANT: Comply with instructions on HANDLING OPTICAL FIBRES .

Necessary preliminary work:

Clamp off NEGATIVE BATTERY CABLE .
Remove LUGGAGE COMPARTMENT WHEEL ARCH PANEL ON LEFT .

Release screw (1).

Remove amplifier (4) including holder (2).

Unfasten plug connections (3) and disconnect.