67 31 600 Removing and installing/replacing forward/back seat adjustment drive unit (rear seats): Notes

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove COMPLETE PADDING FOR REAR SEAT

Unclip flex shaft cover (1) towards top.

Fig 1: Unclipping Flex Shaft Cover Towards Top

Courtesy of BMW OF NORTH AMERICA, INC.

Pull long sleeve tube (1) with flex shaft out of gearing.

Fig 2: Pulling Long Sleeve Tube With Flex Shaft From Gearing

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (2).

Release screws (1).

Tightening torque 67 31 10AZ .

Remove drive for longitudinal seat adjustment.

Detach flex shafts from drive.

Fig 3: Identifying Plug Connection With Mounting Screws

Courtesy of BMW OF NORTH AMERICA, INC.