33 11... Removing and installing/replacing vibration absorber

Vibration absorber to anti-roll bar, right: 

Release screws (1).

Tightening torque 33 55 3AZ .

Remove vibration absorber (2).

Installation note: 

Replace screw.

Fig 1: Identifying Vibration Absorber To Anti-Roll Bar (Right) And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Vibration absorber to rear axle differential, front right: 

Slacken nut (1).

Tightening torque 33 17 3AZ .

Remove vibration absorber (2).

Installation note: 

Replace nut.

First, screw the rear axle differential to the rear axle support with the specified tightening torque.

Fig 2: Identifying Vibration Absorber To Rear Axle Differential (Front Right) And Nut

Courtesy of BMW OF NORTH AMERICA, INC.

Vibration absorber to rear axle differential: 

Release screw (1).

Tightening torque 33 11 3AZ .

Remove vibration absorber (2).

Fig 3: Identifying Vibration Absorber To Rear Axle Differential And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Vibration absorber to rear axle support, front: 

Release screws (1).

Tightening torque 33 33 4AZ .

Remove vibration absorber (2).

Fig 4: Identifying Vibration Absorbers To Rear Axle Support (Front) And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Vibration absorber to rear adapter: 

Release screw (1).

Tightening torque 33 11 10AZ .

Remove vibration absorber (2).

Fig 5: Identifying Vibration Absorber To Rear Adapter And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Vibration absorber to front adapter: 

Support rear axle differential. Slacken nut (1).

Tightening torque 33 17 1AZ .

Remove screw and vibration absorber (2).

Installation note: 

Replace nut (1) and screw.

Fig 6: Identifying Vibration Absorber To Front Adapter And Nut

Courtesy of BMW OF NORTH AMERICA, INC.