33 17 Rear axle final drive suspension
WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - REAR AXLE FINAL DRIVE SUSPENSION
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Rear axle final drive to rear axle support, front | F01/F02/F03/F04/F07/F10/F11/F12/F13/F18 | M12 | FOLLOW REPAIR INSTRUCTION
. Replace screws. |
|
| Jointing torque | 100 Nm | ||||
| Angle of rotation | 90 ° | ||||
| F25 | M12 | Repair instructions! | 100 Nm | ||
| 2AZ | Rear axle final drive to rear axle support, rear | F01/F02/F03/F04/F07/F10/F11/F12/F13/F18 | M14 | FOLLOW REPAIR INSTRUCTION
. Replace nut. |
175 Nm |
| F25 | M14 | Repair instructions! Mother renew. |
165 Nm | ||
| 3AZ | Vibration absorber on front right rear axle final drive | F11 | M14 | Replace nut. | 56 Nm |