33 32 153 Removing and installing/replacing front compression strut

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT:

Observe SAFETY INSTRUCTIONS for raising the vehicle

Driving without compression struts is not permitted!

Release screws of underbody panelling (1).

Remove underbody panelling (1).

Fig 1: Identifying Underbody Panelling With Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Tightening torque 33 33 2AZ .

Release screw (2) and remove compression strut (3).

Tightening torque 33 33 1AZ .

IMPORTANT: Secure rear axle support by inserting screw (2).

Installation note:

Check threads for damage; if necessary, repair with HELICOIL THREAD INSERTS .

Fig 2: Identifying Compression Strut And Screw

Courtesy of BMW OF NORTH AMERICA, INC.