64 11 805 Replacing servodrive of fresh air/recirculated air flap (automatic A/C)

WARNING: This page is about a different car, the 2003 BMW X5, 2002 BMW X5, 2001 BMW X5, and 2000 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Remove trim for pedal assembly. Refer to 51 45 185 REMOVING AND INSTALLING/REPLACING TRIM FOR PEDAL ASSEMBLY .

Unclip air duct for footwell on left (2) at mounts (1) and remove in direction of arrow.

Fig 1: Removing Air Duct For Footwell On Left

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip lock (2) and pull out servodrive (3) in direction of arrow.

Fig 2: Pulling Out Servodrive

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Installation:

If necessary, align shaft of fresh air/recirculated air flap to position of servodrive.

Fig 3: Aligning Shaft Of Fresh Air/Recirculated Air Flap To Position Of Servodrive

Courtesy of BMW OF NORTH AMERICA, INC.