64 53 550 Removing And Installing Or Replacing Condenser For Air Conditioner

WARNING: This page is about a different car, the 2003 BMW X5, 2002 BMW X5, 2001 BMW X5, and 2000 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

A/C system is drawn off. Refer to 64 50 009 DRAWING OFF, EVACUATING AND FILLING A/C SYSTEM (R 134A) .

Remove intake hood. Refer to 17 11 031 REPLACING FAN COWL (M62 / M54) .

M54, M62 only:

Remove intake filter housing.

Release screws (1) and remove radiator bracket (2).

Fig 1: Detaching Rubber Strip

Courtesy of BMW OF NORTH AMERICA, INC.

Detach rubber strip (3).

Release screws (1) and detach lines (2).

Fig 2: Releasing Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Replace sealing rings.

Release screws (3).

Gently press cooler (1) towards rear and lift out A/C condenser (2).

Fig 3: Removing Condenser

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Lugs of plastic guides (3) must be securely engaged in bores.

Replace faulty plastic guides.

Installation:

If A/C system is opened for more than 24 hours:

Replace desiccator insert. Refer to 64 53 515 REPLACING DRIER INSERT FOR A/C SYSTEM .