33 52 Shock Absorbers
WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING SPECIFICATIONS - SHOCK ABSORBERS
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Shock absorber to thrust bearing | E81, E82, E87, E88, E90, E91, E92, E93 | M10 | Replace support bearing upper section | 27 Nm |
| E90 / S65, E92 / S65, E93 / S65 | M14 | Replace nut | 37 Nm | |
| 2AZ Shock absorber to rubber mount | E81, E82, E87, E88, E90 / Except S65, E91, E92 / Except S65, E93 | M10 | Replace nut | 38 Nm |
| 3AZ Rubber mount, shock absorber, to camber arm | E81, E82, E87, E88, E90 / Except S65, E91, E92 / Except S65, E93 | M10 | Replace screws | 60 Nm |
| 4AZ Shock absorber to camber arm | E90 / S65, E92 / S65, E93 / S65 | M12 | Tighten In Normal Position | 100 Nm |