32 00... Moving vehicle into design position

WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Move vehicle into normal position

Version with air spring system:
- Remove ignition key
- Pull fuse for air supply unit control unit
Add/distribute weights in area of spring struts until the vehicle ride height is within the tolerance (refer to STEERING AND WHEEL ALIGNMENT - TECHNICAL DATA ).
Measure ride-level height of vehicle . See STEERING AND WHEEL ALIGNMENT - TECHNICAL DATA .