65 50 170 Replacing the cover for the Central Information Display (CID) (up to 10/2009)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD PROTECTION ).

Necessary preliminary work:

Remove Central Information Display

Carefully release latch mechanisms (1).

Installation note: Latch mechanisms (1) must not be damaged.

Fig 1: Identifying Catches

Courtesy of BMW OF NORTH AMERICA, INC.

Carefully raise cover (2).

Disconnect plug connection (1) and remove cover (2) from CID.

Fig 2: Identifying Plug Connection With Raise Trim

Courtesy of BMW OF NORTH AMERICA, INC.