51 16 373 Removing and installing/replacing lock for glovebox lid on left or right

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove glovebox, see 51 16 360 Removing and installing right glovebox

Release screws (1).

Remove lock (2).

Fig 1: Identifying Lock And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Grommets (1) on glovebox (2) must not be damaged.

Lock must be correctly inserted into grommets (1).

Fig 2: Identifying Grommets And Glovebox

Courtesy of BMW OF NORTH AMERICA, INC.