65 12 230 Removing and installing/replacing DAB tuner

WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD protection) . See61 35 ... NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE) .

NOTE: Follow instructions for handling optical fibres .

Necessary preliminary tasks:

Disconnect battery negative lead . See 61 20 900 DISCONNECTING AND CONNECTING BATTERY NEGATIVE LEAD .
Remove luggage compartment floor trim . See 51 47 101 REMOVING AND INSTALLING/REPLACING LUGGAGE COMPARTMENT FLOOR TRIM PANEL .

E93:

Remove panel for luggage compartment partition . See 51 47 140 REMOVING AND INSTALLING/REPLACING PANEL FOR LUGGAGE COMPARTMENT PARTITION .

Release screws (1).

Disconnect plug connections (2) and remove bracket with DAB tuner (3).

Installation:

DAB tuner bracket (3) must be inserted in guides.

Fig 1: Disconnect Plug Connections And Remove Bracket With DAB Tuner

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Release screws (1) and remove DAB tuner (2).

Fig 2: Identifying DAB Tuner And Screws

Courtesy of BMW OF NORTH AMERICA, INC.