22 11 011 Replacing left engine mount (S65)

WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Secure engine in installation position . See 11 00 670 SECURING ENGINE IN INSTALLATION POSITION (S65) .
Lower front axle support . See 31 11 506 LOWERING/RAISING FRONT AXLE CARRIER (M3, UNIVERSAL LIFTER) .

Slacken nut (1).

Tightening torque 22 11 1AZ , see 22 11 ENGINE SUSPENSION .

Installation:

Replace nuts.

Fig 1: Slacken Nut

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Installation position of engine mount determined by locating pin.