22 11 Engine Suspension
WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE SUSPENSION-TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Engine mount to front axle support | E52/E85/E86 | 42 Nm | ||
| E65/E66/E67 | M8-8 | 19 Nm | |||
| E60/E61/E63/E64/E83 | M8-8 | 21 Nm | |||
| E53 | M8-10.9 | 30 Nm | |||
| E87/E90/E91/E92/E93/E70/E71/E83/E81/E82/E88/E89 | M8 10.9 | 28 Nm | |||
| E70/E71/E83 | M10 | 38 Nm | |||
| E92/E90/S65 | M10 | 56 Nm | |||
| 2AZ | Engine mount to engine support arm | E60/E61/E63/E64/E65/E66/E67/E53/E83/E87/E90/E91/E92/E93/E70/E71/E81/E82/E88/E89 | M10 10.9 | 56 Nm | |
| E65/E66/E67 | M12 10.9 | 100 Nm | |||
| E70/E71/E83 | M12 | 68 Nm | |||
| E85/E86/E52 | 42 Nm | ||||
| E92 | M10 | 38 Nm | |||
| 3AZ | Engine support arm to engine | E60/E61/E63/E64/E65/E66/E67/E83/E87/E90/E91/E70/E71/E81/E82/E92/E93/E88/E89 | M10 8.8 | 38 Nm | |
| N51/N52/N52K/N53 | M12 | marked blue must be replaced | |||
| 1. Jointing torque | 25 Nm | ||||
| 2. Angle of rotation | 105 ° | ||||
| E60/E61/E65/E66/E67 | M8 8.8 | 19 Nm | |||
| E85/E83 | M8 8.8 | 21 Nm | |||
| E70/E71 | M10 10.9 | 56 Nm | |||
| E53 (N62/ M54) | 38 Nm | ||||
| E53 (M57) | 65 Nm | ||||
| N54 | M12 | N54 engine only | 66 Nm | ||
| 4AZ | Engine mount to mounting bracket | E65/E60/E61/E63/E64 | M8 8.8 | 21 Nm | |
| 5AZ | Mounting bracket to front axle carrier | E65/E60/E61/E63/E64 | M8-8 | 21 Nm | |
| 6AZ | Vibration damper to engine carrier | E70/E71 | 19 Nm | ||
| 7AZ | Reinforcement plate to front axle carrier | E90/E91/E92 | M8 | 19 Nm | |
| 8AZ | Support angle to engine mount or front axle carrier | E90/E91/E92 | M8 | 19 Nm | |