11 31 095 Removing and installing/replacing right hydraulic chain tensioner (S65)
WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove expansion tank. See 17 11 100 REMOVING AND INSTALLING/REPLACING COOLANT EXPANSION TANK (S65) .
- Unfasten both A/C lines on A/C compressor.
Release chain tensioner (1).
Installation:
Replace sealing ring.
Tightening torque: 11 31 1AZ . See 11 31 CAMSHAFT .
Assemble engine.