11 31 Camshaft
WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
CAMSHAFT-TIGHTENING TORQUE SPECIFICATIONS
| |
Type |
Thread |
Tightening specification |
Measure |
| 1AZ |
Chain tensioner |
S65 |
M26x1.5 |
Insert screws dry |
65 Nm |
| 2AZ |
Bearing pin to crankcase and both cylinder heads (sliding rail) |
S65 |
M8 |
|
20 Nm |