51 45 310 Removing and installing (replacing) centre instrument panel trim (up to 03/2007)

WARNING: This page is about a different car, the 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove DECORATIVE STRIP ON INSTRUMENT PANEL ON RIGHT

Release screws (1).

NOTE: Feed in screwdriver (2) of sufficient length as illustrated ahead of trim for instrument panel (4).

Unclip upper retaining points (3) by pressing screwdriver (2) towards front.

Unclip lower retaining points (5).

Unlock associated plug connections and disconnect.

Remove center trim for instrument panel (4).

Fig 1: Removing Center Trim For Instrument Panel

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Remove OPERATOR UNIT FOR HEATER/AIR CONDITIONER
Remove CENTER CONSOLE SWITCH CENTER