51 16 366 Removing and installing right glovebox with housing

WARNING: This page is about a different car, the 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove FOOTWELL SIDE TRIM PANEL ON A-PILLAR ON RIGHT .
If necessary, remove TRIM FOR INSTRUMENT PANEL AT BOTTOM RIGHT

NOTE: Open glovebox.

Unclip pin (1) from retaining strap (2).

Fig 1: Unclipping Pin From Retaining Strap

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip pin (1) from shock absorber (2).

Fig 2: Unclipping Pin From Shock Absorber

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Release screws (2) and pull back right glovebox with housing (3).

Disconnect associated plug connections and remove right glovebox with housing (3).

Fig 3: Removing Right Glovebox

Courtesy of BMW OF NORTH AMERICA, INC.