51 43 075 Removing and installing / replacing side trim panel, footwell, on A-pillar, right
WARNING: This page is about a different car, the 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
Detach mucket on door (1) in area of side trim panel (2).
Unclip side trim panel (2) in direction of arrow from retaining points (3).
Remove side trim panel (2).
Installation:
If necessary, lever out clips (1) remaining in bores.
If necessary, replace faulty clips (1).
Position side trim panel (2) preinstalled with clips (1) on associated bores and clip into place.