51 16 360 Removing and installing/replacing right glovebox

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Open glovebox.

Unclip pin (1) from retaining strap (2).

Fig 1: Unclipping Pin From Retaining Strap

G04788526

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip pin (1) from shock absorber (2).

Fig 2: Unclipping Pin From Shock Absorber

G04788527

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Close glovebox (3) and secure against falling out.

Release screws (1) and remove counter-support (2).

Open glovebox (3) and remove.

Fig 3: Identifying Screws And Counter-Support

G04788528

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Make sure counter-support (1) is correctly seated on chamfered faces of shaft (2).

If necessary, turn shaft (2) accordingly.

Fig 4: Turning Shaft

G04788529

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Remove LOCK FOR RIGHT GLOVEBOX .