51 16 340 Removing and installing/replacing lock for right glovebox

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

Open glovebox.

Release screws (1).

Remove lower section (3) and upper section (2) of lock.

Fig 1: Identifying Lower Section And Upper Section Of Lock

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Insert ignition key (1) in lock cylinder (3).

Turn ignition key (1) slightly, carefully raise catches (2) and pull out lock cylinder (3) with ignition key (1) in direction of arrow.

If necessary, force catches (2) open.

Fig 2: Identifying Ignition Key In Lock Cylinder

Courtesy of BMW OF NORTH AMERICA, INC.