51 11 160 Removing and installing/replacing trim for air duct on bumper trim (from 03/2007)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove FINISHER ROD
Unclip trim (1) in direction of arrow.
Installation:
Catches on trim (1) must not be damaged.
Pull out air duct (2) slightly.
Clip trim (1) into air duct (2).
Clip both parts together into bumper trim (3).