51 11 181 Removing and installing/replacing finisher rod on trim grille for front bumper trim
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
NOTE:
Release catches (1 and 2) from left to right.
Release catches (1) with special tool 00 9 322 from outside.
Release catches (2).
Remove finisher rod (3).
Installation:
Catches (1 and 2) must not be damaged.