LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 191 (Removal & Installation - Cooper S) >> Removal & Installation >> Manual Transmission >> Installation

Manual Transmission: Installation

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2007 MINI Cooper, 2006 MINI Cooper, 2005 MINI Cooper, 2004 MINI Cooper, and 2003 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

To install, reverse removal procedure. Tighten fasteners to specification. See TORQUE SPECIFICATIONS . Note installation position of rubber elements when installing intake filter housing. See Fig 1. Read out fault memory of EMS control unit. Check stored fault messages. Rectify faults. Clear fault memory. When connecting up battery, reset clock. Initialize power windows. See INITIALIZING POWER WINDOW UNIT .

Fig 1: Locating Installation Position Of Rubber Elements
G00382228Courtesy of BMW OF NORTH AMERICA, INC.