25 11 081 Replacing gaiter (shift lever cover) for shift lever

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove SHIFT/SELECTOR LEVER KNOB .

NOTE: The method for removing the gaiter is the same for manual and automatic transmissions.

Removing gaiter .

Carefully pull gaiter taut on leather.
Press frame inwards slightly until catch is released.
Lift out gaiter.

Fig 1: Pulling Gaiter Taut On Leather
Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Illustrations show E85.

Installation:

Retaining lugs must not be damaged.

Fig 2: Identifying Retaining Lugs

Courtesy of BMW OF NORTH AMERICA, INC.