25 11 071 Replacing knob for shift lever

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Do not twist knob during removal as this would cause the turning lock in the knob to shear off.

Tug firmly to remove knob.

Installation:

Fit knob on selector lever, align and press on until it snaps noticeably into place.

NOTE: Illustration shows E46.

Fig 1: Identifying Knob For Shift Lever

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Push rubber gaiter (1) down until groove (2) is fully exposed.

Fig 2: Identifying Rubber Gaiter And Groove

Courtesy of BMW OF NORTH AMERICA, INC.