51 16 366 Removing and installing right glovebox with housing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove footwell side trim panel on A-pillar on right.
If necessary, remove trim for instrument panel at bottom right

NOTE: Open glovebox.

Unclip pin (1) from retaining strap (2).

Fig 1: Uncliping Pin From Retaining Strap

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip pin (1) from shock absorber (2).

Fig 2: Uncliping Pin From Shock Absorber

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Release screws (2) and pull back right glovebox with housing (3).

Disconnect associated plug connections and remove right glovebox with housing (3).

Fig 3: Removing Right Glovebox With Housing

Courtesy of BMW OF NORTH AMERICA, INC.