25 11 250 Removing and installing/replacing vibration damper
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove shift lever cover .
- Remove shift lever knob .
Release screw (1).
Tightening torque 25 11 10AZ . See GEAR SHIFT MECHANISM - TIGHTENING TORQUES .
Remove vibration damper in direction of arrow.