25 11 071 Replacing knob for shift lever
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Do not twist knob during removal as this would cause the turning lock in the knob to shear off.
Tug firmly to remove knob.
Installation:
Fit knob on selector lever, align and press on until it snaps noticeably into place.
NOTE:
Illustration shows E46.
Installation:
Push rubber gaiter (1) down until groove (2) is fully exposed.