LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1465 (Propeller Shaft - Repair) >> 00 Propeller shaft general >> 26 20 001 Replacing front propeller shaft

26 20 001 Replacing front propeller shaft

WARNING: This page is about a different car, the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, and 2007 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Do not move vehicle with engine power once propeller shaft has been removed. Replace propeller shaft only in conjunction with a new drive flange and radial shaft seal for front axle output.
IMPORTANT: Replacement only: according to installation with BMW diagnosis and information system under control unit function Perform functional check of transfer box (calibration)

Remove front propeller shaft . Replace output flange for front axle output. See 27 10 050 REPLACING OUTPUT FLANGE FOR FRONT AXLE OUTPUT (ATC 400/500 X-DRIVE) . Replace radial shaft seal for output front axle. See 27 21 030 REPLACING RADIAL SHAFT SEAL FOR FRONT AXLE OUTPUT (ATC 400/500 X-DRIVE) .

scientia non olet · About LEMON Manuals