23 11 614 Replacing guide tube for clutch release unit (GS6-37BZ/DZ)

WARNING: This page is about a different car, the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, and 2007 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: (transmission removed)

Necessary preliminary tasks:

Remove clutch release bearing and release lever from guide tube, see 21 51 500 REMOVING AND INSTALLING OR REPLACING CLUTCH RELEASE BEARING/LEVER .

Unfasten screws.

Remove guide tube (1).

Installation:

Clean thread.

Install screws with Loctite 243.

Tightening torque: 23 11 2AZ, see 23 11 CASE AND COVER .

Fig 1: Locating Screws

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Remove sticker (1) and adhesive with a suitable solvent.

Fig 2: Sticker

Courtesy of BMW OF NORTH AMERICA, INC.