52 25 038 Removing and Installing/Replacing Seat Frame On Left or Right Rear Seat

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 750i, 2007 BMW 750Li, and 2006 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

52 0 050

Necessary preliminary tasks:

Remove rear seat. See 52 25 010 REMOVING AND INSTALLING/REPLACING LEFT OR RIGHT REAR SEAT

Release screws (1).

Release retainers in area (2).

Installation:

Bend new retainers closed with 52 0 050 PLIERS .

Remove cover (3).

Fig 1: Identifying Protrusion

G04768332

Courtesy of BMW OF NORTH AMERICA, INC.

Remove drive (1) and valve block (2).

Release screws (3) and remove backrest.

Installation:

Tightening torque, 52 25 3AZ. See 52 25 REAR SEAT (NORMAL), ELECTRIC

Fig 2: Identifying Drive, Screw & Valve Block

G04768333

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: The new seat frame part contains all the drives.