52 25 010 Removing and Installing/Replacing Left or Right Rear Seat
Necessary preliminary tasks:
- Remove flap in luggage compartment panel. See 51 47 172 REMOVING AND INSTALLING/REPLACING FLAP IN LUGGAGE COMPARTMENT TRIM, LEFT OR RIGHT
- Remove rear head restraint . See 52 25 390 REMOVING AND INSTALLING OR REPLACING LEFT OR RIGHT REAR HEAD RESTRAINT
- Remove padding for rear seat completely. See 52 25 002 REMOVING AND INSTALLING PADDING FOR LEFT OR RIGHT REAR SEAT
- Remove rear entrance cover strip . See 51 47 030 REMOVING AND INSTALLING/REPLACING ENTRANCE COVER STRIP, REAR (INSIDE) LEFT OR RIGHT
- Remove supplementary trim on C-pillar at bottom. See 51 43 240 REMOVING AND INSTALLING/REPLACING SUPPLEMENTARY TRIM ON C-PILLAR AT BOTTOM (WITH ELECTRIC REAR SEAT ADJUSTMENT) ON LEFT OR RIGHT
- Remove rear armrest trim . See 52 25 030 REMOVING AND INSTALLING COMPLETE ARMREST FOR REAR SEAT BACKREST
Release screw (1) for seat belt, center.
Tightening torque 72 11 22AZ. See 72 11 SEAT BELTS
Remove cover (1) upwards out of guide (2).
Detach cover (1) from Velcro-type fastener (5), pull out of guide (4) and lift out completely.
Release screws (3).
Insert nuts with Loctite, tightening torque 52 25 01AZ. See 52 25 REAR SEAT (NORMAL), ELECTRIC
Remove cover (1) towards front.
Unfasten screws (2).
Tightening torque 52 25 02AZ. See 52 25 REAR SEAT (NORMAL), ELECTRIC
Disconnect all plug connections and feed out wiring harnesses.
Release screw (1).
Release screw (2).
Tightening torque 72 11 20AZ. See 72 11 SEAT BELTS
Lift complete seat with seat frame and set forward slightly.
Feed out belt with tensioner (3) towards rear. Remove complete seat.