Mounting Engine On Assembly Stand (N54)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 BMW 335xi, 2010 BMW 335i, 2009 BMW 335xi, 2009 BMW 335i, and 2008 BMW 335xi. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 00 1 450
- 11 8 541
- 11 8 542
IMPORTANT:
Aluminum screws/bolts must be replaced each time they are released .
The end faces of aluminum screws/bolts are painted blue for the purposes of reliable identification.
Jointing torque and angle of rotation must be observed without fail (risk of damage) .
Necessary preliminary tasks:
- Remove engine. (See 11 00 050 REMOVING AND INSTALLING ENGINE (N54) )
Mount engine with special tool 11 8 541 to special tool 00 1 450.
Mount engine or engine block with special tool 11 8 542 to 11 8 541.