71 60 051 Replacing complete trailer tow hitch

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: When retrofitting a trailer tow hitch, it is absolutely essential to read and comply with the Notes on retrofitting a trailer towing device .

Necessary preliminary tasks:

Remove Rear Bumper Trim
If necessary, release exhaust system suspension elements

Release screws (1) on both sides.

Unclip cable from fixture.

Remove trailer tow hitch support member (2).

Disconnect all plug connections.

Tightening torque: 59 Nm.

Fig 1: Identifying Trailer Tow Hitch Support Member And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Vehicles up to production date 07.03.2005 only:

Knock out studs (1) towards inside and replace with M12x40 hexagon bolts.

Tightening torque: 59 Nm.

Fig 2: Identifying Trailer Tow Hitch Studs

Courtesy of BMW OF NORTH AMERICA, INC.