67 31 521 Removing and installing/replacing drive unit for seat height adjustment (coupe)
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove FRONT SEAT
Unlock plug connections (1) and disconnect.
Unfasten screws (2).
Remove drive unit for seat height adjustment.
Installation:
Make sure drive shaft is correctly seated in gearbox.