52 13 000 Removing and installing left or right front seat (normal / manual)

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove Head Restraint

WARNING: Read and comply with Safety Regulations for handling airbag modules and pyrotechnical belt tensioners.

Improper handling can lead to triggering of the pyrotechnical seat belt tensioner or side airbag, resulting in injuries.

Switch off ignition.

Release screws (1).

Installation:

Replace screws.

For tightening torque refer to 1AZ in 52 10 FRONT SEATS

Move front seat as far back as possible.

Fig 1: Identifying Seat Rail Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (3).

Installation:

Replace screws.

For tightening torque refer to 1AZ. in 52 10 FRONT SEATS

Unlock plug connection (1) and disconnect plug (2).

IMPORTANT: Cover door sill with protective covers (risk of damage).

Lift out front seat.

Fig 2: Identifying Plug Connection, Plug Connection Lock And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Carpet must not get between seat rails and floor pan in area of fastening points (grating noises).