Necessary preliminary tasks

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Remove LEFT FRONT SEAT
Remove FRONT LEFT ENTRANCE COVER STRIP
Fold back carpet for passenger compartment at front left in direction of travel

Remove USB hub protective socket (1) from footwell insert (2).

Unlock catches (3) with a suitable tool and remove USB hub protective socket cover (5).

Installation:

Make sure USB hub protective socket cover (5) engages correctly on USB hub protective socket lower section.

Seal (4) must not be damaged; if necessary, replace USB hub protective socket cover (5).

Fig 1: Identifying USB Hub Protective Socket With Cover, Socket And Seal

Courtesy of BMW OF NORTH AMERICA, INC.

Remove USB hub (1) from USB hub protective socket lower section (2).

Installation:

Make sure rubber grommet (4) is correctly seated on USB hub protective socket lower section (2).

Disconnect plug connection (3).

Fig 2: Identifying USB Hub With Protective Socket Lower Section, Plug Connection And Rubber Grommet

Courtesy of BMW OF NORTH AMERICA, INC.