51 13 286 Replacing bracket for roof luggage rack on left or right

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove TRIM STRIP FROM ROOF FRAME

Remove body sealing compound (1) with special tool 00 9 322 (wedge) and unfasten threaded pin (2).

Fig 1: Identifying Body Sealing Compound And Threaded Pin

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Threaded pin is designed as Torx from E87 model series.

Installation:

Threaded pin may not be wetted with screw securing adhesive on screw-in thread (1).

Before installing threaded pin, protect body against corrosion (e.g. apply zinc dust paint).

Tightening torque: 20 Nm.

Fig 2: Identifying Screw-In Thread

Courtesy of BMW OF NORTH AMERICA, INC.

Apply body sealing compound (1) (Terostat 9320, sourcing reference: BMW Parts Service) to threaded pin (2) all round.

After hardening time of body sealing compound (1), paint over body sealing compound (1) and threaded pin (2) with paint pencil of corresponding car color.

Fig 3: Identifying Body Sealing Compound And Threaded Pin

Courtesy of BMW OF NORTH AMERICA, INC.