51 13 280 Removing and installing/replacing trim strip on roof frame at left or right
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
- 00 9 321
Necessary preliminary tasks:
E91 only:
- If necessary, remove roof rails
Lever out trim strip (1) with special tool 00 9 321 starting at rear.
Unclip trim strip (1) in direction of arrow.
Installation:
Clips (1) and seals (2) on trim strip (3) must not be damaged.
If necessary, replace faulty clips (1).
Position of clips (1) on trim strip (3) is determined by notch (4).
Installation:
Push trim strip (1) at front into seal (2).
Trim strip (1) must be flush with edge (3) at rear.