51 16 202 Removing and installing/replacing front (inner or outer) cup holder

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove Trim On Instrument Panel on right

Release screws (1) and pull out cup holder (2) in direction of arrow.

Fig 1: Screws, Cup Holder And Removal Direction

Courtesy of BMW OF NORTH AMERICA, INC.