51 45 263 Removing and installing/replacing instrument panel trim on right

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools Required:

00 9 321

Carefully release trim (1) with special tool 00 9 321 from retainers (3) and lock pins (2).

Fig 1: Trim, Retainers, Special Tool(00 9 321) And Lock Pins

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Clips (Hutfix) (1) must be seated in associated mountings.

Replace clips (Hutfix) (1) if they were released during removal.

A Turn clip (Hutfix) (1) with screwdriver to left by approx. 90°
B Lever out clip (Hutfix) (1) from below

Fig 2: Clip (Hutfix) Removal Directions
Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Lock pins (1) and retainers (3) on trim (2) must not be damaged.

If necessary, replace lock pins (1) and retainers (3).

Fig 3: Lock Pins, Retainers And Trim

Courtesy of BMW OF NORTH AMERICA, INC.