51 11 773 Replacing front lower left or right deformation element
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary work:
- Remove support for bumper panel at front bottom.
- Remove FRONT UNDERBODY PROTECTION .
- Remove brake air duct.
Release screw (1).
Tightening torque 51 11 6AZ .
Unfasten screws (2).
Tightening torque 51 11 8AZ .
Remove deformation element (3).