51 11 055 Removing and installing/replacing support for front bottom bumper panel
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary work:
- Remove front BUMPER PANEL
Remove impact absorber (1).
Mark top side on support (3).
Release screws (2) and remove support (3).
Tightening torque 51 11 5AZ .
Installation note:
Install support (3) with marked side towards top.