LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1169 (Propeller Shaft - Repair - E92/E93) >> Propeller Shaft, General >> 26 20 001 Replacing front propeller shaft >> Replacing output flange/radial shaft seal >> Necessary preliminary tasks

Necessary preliminary tasks

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2013 BMW 328i, 2012 BMW 328i, 2011 BMW 328i, 2010 BMW 335i, and 2010 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.

Lever output flange (1) out of housing with screwdriver (2).

Lever radial shaft seal out of housing with a suitable tool.

IMPORTANT: Do not damage housing.
Fig 1: Removing Output Flange Using Screwdriver
G04745131Courtesy of BMW OF NORTH AMERICA, INC.

Drive in radial shaft seal with special tool 27 1 450.

Fig 2: Installing Radial Shaft Seal Using Special Tool 27 1 450
G04745132Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals