26 20 000 Removing and installing front propeller shaft
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2013 BMW 328i, 2012 BMW 328i, 2011 BMW 328i, 2010 BMW 335i, and 2010 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Do not move vehicle with drive power once propeller shaft has been removed.
IMPORTANT:
Replacement only:
Perform functional check of transfer box (calibration) according to installation with BMW diagnosis and information system under control unit function.
Necessary preliminary tasks:
- Remove underbody protection
Release screws.
Installation note:
Replace ZNS bolts.
Tightening torque, 26 11 9AZ .
Release screws.
Remove propeller shaft.
Installation note:
Replace ZNS bolts.
Tightening torque, 26 11 9AZ .