26 20 001 Replacing front propeller shaft: Notes
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2013 BMW 328i, 2012 BMW 328i, 2011 BMW 328i, 2010 BMW 335i, and 2010 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Do not move vehicle with drive power once propeller shaft has been removed.
Output flange replacement: replace output flange only in conjunction with a new radial shaft seal.
IMPORTANT:
Replacement only:
According to installation with BMW diagnosis and information system under control unit function
Perform functional check of transfer box (calibration)
- Remove front PROPELLER SHAFT .
- Replace OUTPUT FLANGE/RADIAL SHAFT SEAL for front axle output.