11 23 010 Removing and installing or replacing vibration damper (N52)

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2008 BMW Z4, 2007 BMW Z4, 2007 BMW 530xi, 2007 BMW 530i, and 2007 BMW 525xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Detach Front Underbody Protection.
Remove Drive Belt.

Release screws (1).

For tightening torque refer to 11 23 1AZ in 11 23 VIBRATION DAMPER (N52) .

Remove vibration damper (2).Vibration Damper

Fig 1: Identifying Vibration Damper And Mounting Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.