33 55 040 Replacing stabilizer links for stabilizer
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2008 BMW 335i, 2008 BMW 328i, 2008 BMW 323i, 2007 BMW 335i, and 2007 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 31 1 140
Release nut (1), gripping with special tool 31 1 140 in the process.
Installation:
Replace self-locking nut.
For tightening torque refer to 33 55 2AZ in 33 55 STABILIZER BAR .
Release screw (3).
For tightening torque refer to 33 55 3AZ in 33 55 STABILIZER BAR .
Remove stabilizer link (2) towards top.